Toward harmonizing prospective effectiveness assessment for road safety: Comparing tools in standard test case simulations

Abstract

Objective: With the overall goal to harmonize prospective effectiveness assessment of active safety systems, the specific objective of this study is to identify and evaluate sources of variation in virtual precrash simulations and to suggest topics for harmonization resulting in increased comparability and thus trustworthiness of virtual simulation-based prospective effectiveness assessment.

Methods: A round-robin assessment of the effectiveness of advanced driver assistance systems was performed using an array of state-of-the-art virtual simulation tools on a set of standard test cases. The results were analyzed to examine reasons for deviations in order to identify and assess aspects that need to be harmonized and standardized. Deviations between results calculated by independent engineering teams using their own tools should be minimized if the research question is precisely formulated regarding input data, models, and postprocessing steps.

Results: Two groups of sources of variations were identified; one group (mostly related to the implementation of the system under test) can be eliminated by using a more accurately formulated research question, whereas the other group highlights further harmonization needs because it addresses specific differences in simulation tool setups. Time-to-collision calculations, vehicle dynamics, especially braking behavior, and hit-point position specification were found to be the main sources of variation.

Conclusions: The study identified variations that can arise from the use of different simulation setups in assessment of the effectiveness of active safety systems. The research presented is a first of its kind and provides significant input to the overall goal of harmonization by identifying specific items for standardization. Future activities aim at further specification of methods for prospective assessments of the effectiveness of active safety, which will enhance comparability and trustworthiness in this kind of studies and thus contribute to increased traffic safety.     

Photodegradation of Hexafluoropropylene Oxide Trimer Acid under UV Irradiation

As a novel alternative to traditional perfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), hexafluoroproplyene oxide trimer acid (HFPO-TA) has been detected worldwide in surface water. Moreover, recent researches have demonstrated that HFPO-TA has stronger bioaccumulation potential and higher hepatotoxicity than PFOA. To treat these contaminants e.g. PFOA and PFOS, some photochemical techniques by adding exogenous substances had been reported. However, there is still no report for the behavior of HFPO-TA itself under direct UV irradiation. The current study investigated the photo-transformation of HFPO-TA under UV irradiation in aqueous solution. After 72 hr photoreaction, 75% degradation ratio and 25% defluorination ratio were achieved under ambient condition. Reducing active species, i.e., hydrated electrons and active hydrogen atoms, generated from water splitting played dominant roles in degradation of HFPO-TA, which was confirmed by different effects of reaction atmospheres and quenching experiments. A possible degradation pathway was proposed based on the products identification and theoretical calculations. In general, HFPO-TA would be transformed into shorter-chain PFASs, including hexafluoropropylene oxide dimer acid (HFPO-DA), perfluoropropionic acid (PFA) and trifluoroacetate (TFA). This research provides basic information for HFPO-TA photodegradation process and is essential to develop novel remediation techniques for HFPO-TA and other alternatives with similar structures.     

活性炭法测量室内空气中氡浓度的影响因素研究

探讨了各种因素对活性炭法测量室内空气中氡浓度的影响,并提出既能保证检测质量,又能符合工程检测需要、提高检测效率的检测条件范围。     

SBR-COR工艺处理高浓度、多品种混合化工污水

介绍了ＳＢＲ－ ＣＯＲ 工艺处理高浓度、多品种混合化工污水的工艺流程、工作原理及闲置保养情况，详细地阐述了活性污泥生物相与运行状况的关系。实际运行表明，ＳＢＲ－ ＣＯＲ 具有重新启动所需时间短、微生物激活快，对浓度高、毒性大的化工污水具有耐冲击特性，外理效果显著。     

CFB锅炉燃烧高硫石油焦的灰渣综合利用研究

循环流化床锅炉在燃烧含硫石油焦时,通过加入石灰石在燃烧的过程中以固态的形式脱硫,燃烧后将产生大量的灰渣,过去处理灰渣最通常的方式是作土地填埋。从灰渣的化学、物理特性试验研究出发,寻找循环流化床灰渣在建筑材料、农业应用和水泥添加剂方面的利用途径,研究了更加经济有效的灰渣处理方法。     

活性氧的化学发光测定法

以作者近年来的研究结果为中心 ,综合地介绍过氧化氢 (H2 O2 )、单线态氧 ( 1O2 )、超氧阴离子自由基 ( .O-2 )以及羟自由基 ( .OH)等活性氧化学发光研究的最新动态 .侧重介绍活性氧的鲁米诺、光泽精、甲壳动物荧光素化学发光测定体系 ,比较了这几种方法的各自特点和应用情况     

活性艳红X-3B微波辅助光催化脱色的研究

研究了微波辅助光催化氧化(MW/UV/TiO2)处理活性艳红(X 3B)模拟废水。结果表明:400mg/LX 3B在反应150min时的脱色率由UV/TiO2体系的7.07%、MW体系的13.52%提高到了MW/UV/TiO2体系的56.35%。脱色反应速率随初始浓度(CX 3B)的增大而减慢;在强酸性介质中,脱色率更高;光照度(E)越强,越有利于X 3B脱色反应;改变催化剂投加量对X 3B脱色影响不大;H2O2浓度增加,X 3B脱色率升高;在以上条件下,X 3B的脱色反应均符合一级反应动力学方程,脱色反应中同时存在自由基反应与直接光解反应。     

清洁的胡椒基T醚生产工艺的研究I,5-丙基-1,3-苯并二氧杂茂的氯甲基化废水的处理

报道了胡椒基丁醚生产中５－丙基－１，３－苯并二氧杂茂的氯甲基化的废水处理，该废水经蒸馏可回收９４％的盐酸，此酸吸收氯化氢后浓度在３６％以上，可再用于氯甲基化反应。蒸馏残液经分油、Ｆｅｎｔｏｎ试剂处理和五次生炭柱吸附后ＣＯＤＣｒ等项指标均可国家二类污染物的一级排放标准。     

炼油污水回用方案初探

针对污水处理场改造后的水质情况，结合现有闲置设备的状况，提出一套既符合现场实际又有针对性的污水回用处理方案。     

引燃点火减轻焦炉烟尘污染

土法炼焦，对大气环境污染严重。采用引燃点火无回收焦炉，操作简单，材料省，出焦优质，大大减轻了对大气的污染。本文对引燃点火无回收焦炉的结构及有关问题作了较为详细的叙述。